1,739 research outputs found

    Inkjet printed LED based pH chemical sensor for gas sensing

    Get PDF
    Predictable behaviour is a critical factor when developing a sensor for potential deployment within a wireless sensor network (WSN). The work presented here details the fabrication and performance of an optical chemical sensor for gaseous acetic acid analysis, which was constructed using inkjet printed deposition of a colorimetric chemical sensor. The chemical sensor comprised a pH indicator dye (bromophenol blue), phase transfer salt tetrahexylammonium bromide and polymer ethyl cellulose dissolved in 1-butanol. A paired emitter-detector diode (PEDD) optical detector was employed to monitor responses of the colorimetric chemical sensor as it exhibits good sensitivity, low power consumption, is low cost, accurate and has excellent signal to noise ratios. The chemical sensor formulation was printed directly onto the surface the emitter LED, and the resulting chemical sensors characterised with respect to their layer thickness, response time and recovery time. The fabrication reproducibility of inkjet printed chemical sensors in comparison to drop casted chemical sensors was investigated. Colorimetric chemical sensors produced by inkjet printing, exhibited an improved reproducibility for the detection of gaseous acetic acid with a relative standard deviation of 5.5 % in comparison to 68.0 % calculated for drop casted sensors (n = 10). The stability of the chemical sensor was also investigated through both intra and inter-day studies

    First Attempt at Spectroscopic Detection of Gravity Modes in a Long-Period Pulsating Subdwarf B Star -- PG 1627+017

    Full text link
    In the first spectroscopic campaign for a PG 1716 variable (or long-period pulsating subdwarf B star), we succeeded in detecting velocity variations due to g-mode pulsations at a level of 1.0-1.5 km/s.The observations were obtained during 40 nights on 2-m class telescopes in Arizona, South Africa,and Australia. The target,PG1627+017, is one of the brightest and largest amplitude stars in its class.It is also the visible component of a post-common envelope binary.Our final radial velocity data set includes 84 hours of time-series spectroscopy over a time baseline of 53 days. Our derived radial velocity amplitude spectrum, after subtracting the orbital motion, shows three potential pulsational modes 3-4 sigma above the mean noise level, at 7201.0s,7014.6s and 7037.3s.Only one of the features is statistically likely to be real,but all three are tantalizingly close to, or a one day alias of, the three strongest periodicities found in the concurrent photometric campaign. We further attempted to detect pulsational variations in the Balmer line amplitudes. The single detected periodicity of 7209 s, although weak, is consistent with theoretical expectations as a function of wavelength.Furthermore, it allows us to rule out a degree index of l= 3 or l= 5 for that mode. Given the extreme weakness of g-mode pulsations in these stars,we conclude that anything beyond simply detecting their presence will require larger telescopes,higher efficiency spectral monitoring over longer time baselines,improved longitude coverage, and increased radial velocity precision.Comment: 39 pages, 9 figures, 4 tables, ApJ accepted. See postscript for full abtrac

    Hypervelocity Stars. I. The Spectroscopic Survey

    Full text link
    We discuss our targeted search for hypervelocity stars (HVSs), stars traveling with velocities so extreme that dynamical ejection from a massive black hole is their only suggested origin. Our survey, now half complete, has successfully identified a total of four probable HVSs plus a number of other unusual objects. Here we report the most recently discovered two HVSs: SDSS J110557.45+093439.5 and possibly SDSS J113312.12+010824, traveling with Galactic rest-frame velocities at least +508+-12 and +418+-10 km/s, respectively. The other late B-type objects in our survey are consistent with a population of post main-sequence stars or blue stragglers in the Galactic halo, with mean metallicity [Fe/H]=-1.3 and velocity dispersion 108+-5 km/s. Interestingly, the velocity distribution shows a tail of objects with large positive velocities that may be a mix of low-velocity HVSs and high-velocity runaway stars. Our survey also includes a number of DA white dwarfs with unusually red colors, possibly extremely low mass objects. Two of our objects are B supergiants in the Leo A dwarf, providing the first spectroscopic evidence for star formation in this dwarf galaxy within the last ~30 Myr.Comment: 10 pages, uses emulateapj, accepted by Ap

    Observing Strategies for the Detection of Jupiter Analogs

    Get PDF
    To understand the frequency, and thus the formation and evolution, of planetary systems like our own solar system, it is critical to detect Jupiter-like planets in Jupiter-like orbits. For long-term radial-velocity monitoring, it is useful to estimate the observational effort required to reliably detect such objects, particularly in light of severe competition for limited telescope time. We perform detailed simulations of observational campaigns, maximizing the realism of the sampling of a set of simulated observations. We then compute the detection limits for each campaign to quantify the effect of increasing the number of observational epochs and varying their time coverage. We show that once there is sufficient time baseline to detect a given orbital period, it becomes less effective to add further time coverage-rather, the detectability of a planet scales roughly as the square root of the number of observations, independently of the number of orbital cycles included in the data string. We also show that no noise floor is reached, with a continuing improvement in detectability at the maximum number of observations N = 500 tested here.Peer reviewe

    Oscillation frequencies and mode lifetimes in alpha Centauri A

    Full text link
    We analyse our recently-published velocity measurements of alpha Cen A (Butler et al. 2004). After adjusting the weights on a night-by-night basis in order to optimize the window function to minimize sidelobes, we extract 42 oscillation frequencies with l=0 to 3 and measure the large and small frequency separations. We give fitted relations to these frequencies that can be compared with theoretical models and conclude that the observed scatter about these fits is due to the finite lifetimes of the oscillation modes. We estimate the mode lifetimes to be 1-2 d, substantially shorter than in the Sun.Comment: Accepted by Ap

    Pango lineage designation and assignment using SARS-CoV-2 spike gene nucleotide sequences

    Get PDF
    BACKGROUND: More than 2 million SARS-CoV-2 genome sequences have been generated and shared since the start of the COVID-19 pandemic and constitute a vital information source that informs outbreak control, disease surveillance, and public health policy. The Pango dynamic nomenclature is a popular system for classifying and naming genetically-distinct lineages of SARS-CoV-2, including variants of concern, and is based on the analysis of complete or near-complete virus genomes. However, for several reasons, nucleotide sequences may be generated that cover only the spike gene of SARS-CoV-2. It is therefore important to understand how much information about Pango lineage status is contained in spike-only nucleotide sequences. Here we explore how Pango lineages might be reliably designated and assigned to spike-only nucleotide sequences. We survey the genetic diversity of such sequences, and investigate the information they contain about Pango lineage status. RESULTS: Although many lineages, including the main variants of concern, can be identified clearly using spike-only sequences, some spike-only sequences are shared among tens or hundreds of Pango lineages. To facilitate the classification of SARS-CoV-2 lineages using subgenomic sequences we introduce the notion of designating such sequences to a “lineage set”, which represents the range of Pango lineages that are consistent with the observed mutations in a given spike sequence. CONCLUSIONS: We find that many lineages, including the main variants-of-concern, can be reliably identified by spike alone and we define lineage-sets to represent the lineage precision that can be achieved using spike-only nucleotide sequences. These data provide a foundation for the development of software tools that can assign newly-generated spike nucleotide sequences to Pango lineage sets. SUPPLEMENTARY INFORMATION: The online version contains supplementary material available at 10.1186/s12864-022-08358-2

    First Kepler results on compact pulsators II: KIC 010139564, a new pulsating subdwarf B (V361 Hya) star with an additional low-frequency mode

    Full text link
    We present the discovery of nonradial pulsations in a hot subdwarf B star based on 30.5 days of nearly continuous time-series photometry using the \emph{Kepler} spacecraft. KIC 010139564 is found to be a short-period pulsator of the V361 Hya (EC 14026) class with more than 10 independent pulsation modes whose periods range from 130 to 190 seconds. It also shows one periodicity at a period of 3165 seconds. If this periodicity is a high order g-mode, then this star may be the hottest member of the hybrid DW Lyn stars. In addition to the resolved pulsation frequencies, additional periodic variations in the light curve suggest that a significant number of additional pulsation frequencies may be present. The long duration of the run, the extremely high duty cycle, and the well-behaved noise properties allow us to explore the stability of the periodic variations, and to place strong constraints on how many of them are independent stellar oscillation modes. We find that most of the identified periodicities are indeed stable in phase and amplitude, suggesting a rotation period of 2-3 weeks for this star, but further observations are needed to confirm this suspicion.Comment: 10 pages, accepted for publication in MNRA

    Mode identification from monochromatic amplitude and phase variations for the rapidly pulsating subdwarf B star EC 20338-1925

    Full text link
    We obtain time-series spectrophotometry observations at the VLT with the aim of partially identifying the dominant oscillation modes in the rapidly pulsating subdwarf B star EC 20338-1925 on the basis of monochromatic amplitude and phase variations. From the data gathered, we detect four previously known pulsations with periods near 147, 168, 126 and 140 s and amplitudes between 0.2 and 2.3 % of the star's mean brightness. We also determine the atmospheric parameters of EC 20338-1925 by fitting our non-LTE model atmospheres to an averaged combined spectrum. The inferred parameters are Teff = 34,153+-94 K, log g =5.966+-0.017 and log[N(He)/N(H)] = - 1.642+-0.022, where the uncertainty estimates quoted refer to the formal fitting errors. Finally, we calculate the observed monochromatic amplitudes and phases for the periodicities extracted using least-squares fitting to the light curves obtained for each wavelength bin. These observed quantities are then compared to the corresponding theoretical values computed on the basis of dedicated model atmosphere codes and also taking into account non-adiabatic effects. We find that the quality of the data is sufficient to identify the dominant pulsation at 146.9 s as a radial mode, while two of the lower amplitude periodicities must be low-degree modes with l=0-2. This is the first time that monochromatic amplitudes and phases have been used for mode identification in a subdwarf B star, and the results are highly encouraging.Comment: 11 pages. Accepted for publication in Astronomy & Astrophysic
    • 

    corecore